MITUS 206LA
Description
- Compact 2-way, bi-amplified bass-reflex design
- 2 x 6.5’’ (165 mm) B&C neodymium woofers with 1.7’’ (44 mm) coil 1.4’’ (36 mm) exit
- B&C neodymium driver with 2.5’’ (64 mm) coil
- Frequency response from 68Hz to 20KHz
- Latest class D built-in amplifiers, 600Wrms to the LF and 300Wrms to the HF with switch mode power supply
- DSP on-board with 8 presets, +/- 5db HF level control for accurate amplitude shading
- Control panel with XLR input and link, volume, presets, HF level, HP-filter, ground-lift 100° horizontal waveguide with very low distortion and near flat wavefront up to 18Khz
- High impact polypropylene gas-injected enclosure with integrated rigging hardware adjustable with 0° to 10° angle between cabinets at 2° step Ideal for small to medium sized application, from single pole mounted loudspeakers with 100°H x 10°V coverage to multiple cabinet full sized line array, the MITUS 206LA maybe used also in outdoor applications where the system is not directly exposed to the elements
- Wide range of hardware accessories for flying and ground stacked configurations
- Very lightweight, only 14Kg
TECHNICAL SPECIFICATIONS
CODE:31708
BUILT-IN AMPLIFIER LF/HF:600/300 W RMS
BUILT-IN AMPLIFIER PEAK LF/HF:1200/600 W
FREQUENCY RESPONSE:68Hz - 20KHz -6dB
LOW FREQUENCY WOOFER:2 x 165 bobina 44 neodimio inch
HIGH FREQUENCY DRIVER:1 x 36 bobina 64 neodimio inch
MAXIMUM SPL CONT/PEAK:125/134 dB
DISPERSION:100°x10° max dipendente dal n° degli elementi H x V
INPUT IMPEDANCE:22 Kohm
CROSSOVER FREQUENCY:1.2 KHz
AC POWER REQUIREMENTS:640 VA
INPUT CONNECTOR:XLR con loop
POWER CORD:5 mm/inch
NET DIMENSION (WXHXD):574x220x383 mm/inch
NET WEIGHT:14 kg/lb
TRANSPORT DIMENSION (WXHXD):655x455x280 mm/inch
TRANSPORT WEIGHT:15.7 kg/lb
