- Brands
- Caymon
-
HIGH END SYSTEMS
HIGH END SYSTEMS
- GLP
- Harrison
- BRYSTON
- ETC
- Solid State Logic
- d&b
-
PMC Speakers
PMC Speakers
- Prolyte Truss
- LITEC Truss
-
EXE Technology
EXE Technology
- FBT
- Joeco
-
Vega Pro
Vega Pro
- Prolyft
-
LightShark
LightShark
- Procab
- Audio Systems
Solid State Logic
- Studio Consoles
- SSL Mixers
- SSL Controllers
- SSL Live Consoles
- Portable USB Microphones
- SSL 500 Series Modules
- 19inch Analogue Processors
- SSL L100 Plus
- Analog Processors
- Audio Interfaces
- Dante I/O & Interfaces
- Duality Fuse
- Matrix2
- Nucleus2
- XL-Desk
- SSL L350 Plus
- SSL L200 Plus
- SSL Origin
- SSL AWS Delta
FBT
- FBT STAGE MONITORS
- FBT - LINE ARRAYS
- FBT SUBWOOFERS
- FBT COLUMN SPEAKERS
- FBT TWO-WAY ARRAYS
- FBT POINT SOURCES
- FBT WEATHERPROOF SPEAKERS
- FBT AMPLIFIERS
- EN54 VOICE ALARM - SECURITY AND EMERGENCY SYSTEMS
- EN54 VOICE ALARM CONSOLES
- EN54 VOICE ALARM SPEAKERS
- FBT ELECTRONICS
- FBT SOUND PROJECTOR
- FBT CEILING SPEAKERS
- FBT MICROPHONES
- FBT MUSICAL HORN
- FBT OUTDOOR SPEAKERS
- FBT PERMANENT INSTALLATION SPEAKERS
- FBT SURFACE MOUNT SPEAKERS
- Stage Lighting & Effects
- Trussing & Staging
Prolyte Truss
- Prolyte Standard Corners
- Prolyte Box Corners
- Prolyte Book Corners
- Prolyte Baseplates
- Prolyte Tubes
- Prolyte Accessories
- Prolyte Circular Truss
- Prolyte Ladder Truss
- Outdoor Advertising Structures
- Prolyte LSU System
- Prolyte Rectangular Truss
- Prolyte Rigging Accessories
- Prolyte Square Truss
- Prolyte Triangular Truss
- Prolyte Verto Truss
- Prolyte Folding Truss
- Prolyte Catwalk Truss
- Studio Equipment & Outboards
- Cables & Accessories
- Trussing & Staging
D80 amplifier
Description
D80 amplifier
High power four channel amplifier
- Maximum output power
4 x 4000 W into 4 Ω - All current d&b loudspeaker setups
- Display Colour TFT touchscreen, 3.5"/320 x 240 pixel
Article number Z2710
Product Description
The D80 Touring racks
The D80 Touring racks are designed as fully equipped and prewired system racks, providing mains power distribution, connector interfaces and all internal cabling for either three or six D80 amplifiers.
The 3 x D80 Touring rack is available with either a 32 A CEE mains power connector with a 32 A mains link or one 30 A NEMA mains socket, and a loudspeaker connector panel with three NL8 (4 channel) and one LKA25 (12 channel) loudspeaker outputs. Electrically interlocked auxiliary mains outputs (powerCON1 16 A sockets) are provided to power the DS10 and other low current devices such as laptops.
The 6 x D80 Touring rack is available with either a single 32 A CEE mains power distribution panel, or a dual 30 A NEMA mains power distribution panel. Electrically interlocked auxiliary mains outputs (powerCON1 16 A sockets) are provided to power the DS10 and other low current devices such as laptops. The 2 RU loudspeaker connector panel of the 6 x D80 Touring rack assembly provides six NL8 (4 channel) and two LKA25 (12 channel) loudspeaker outputs. This loudspeaker connector panel is also equipped with a Power over Ethernet (POE) socket to connect and power an inclinometer.
The DS10 Audio network bridge delivers 16 AES3 outputs to the D80 amplifiers via the Dante audio transport protocol over Ethernet, while also providing distribution of control data. It incorporates an integrated 5-port switch, offering a primary and redundant network for the Dante protocol, as well as advanced functions such as Multicast Filtering and VLAN modes. This extensive switch flexibility provides extended connectivity for a laptop to control the d&b amplifiers using the R1 Remote control software via the OCA (Open Control Architecture) protocol. Using the DS10 Audio network bridge, audio signals and remote control data can be combined using a single Ethernet cable. The front panel of the DS10 is designed to align with the input panel of the D80 Touring rack assembly.
The 19” internal shockmount steel frames also accommodates an I/O panel providing both analog and digital audio signals as well as four network connectors for either Ethernet or CAN-Bus remote networking. The 3 x D80 Touring rack is provided with either a DS10 Audio network bridge, which comes supplied with all necessary cabling, or a 1 RU drawer. The DS10 Audio network bridge is provided in the 6 x D80 Touring rack as standard.
The DS10 Rack upgrade kit contains everything required to replace the drawer within the D80 Touring rack assembly with a DS10. This kit includes a DS10 Audio network bridge, a powerCON1 to powerCON1 mains cable, an Ethernet patch cable and two AES3 XLR patch cables.
The MC24 multicore
Large line array systems require an efficient multicore solution, especially when each loudspeaker in an array is driven individually with ArrayProcessing. The d&b MC24 multicore system is designed specifically for use with the D80 Touring racks. It provides 12 amplification channels (24 lines 4 mm2) with an LKA25 F/M connector, delivering 12 channels in Dual Channel mode, or 6 channels in 2-Way Active mode and Mix TOP/SUB mode. The reinforced cable, heavy duty mesh cable gland and bayonet clutch within the LKA25 connector improves handling and reliability. A single 6 x D80 Touring rack can drive up to 12 SL-Series or J-Series cabinets in ArrayProcessing, or 24 KSL / J Top TOP cabinets in standard mode with linked loudspeakers. Up to 24 T, Y or V-Series line array loudspeakers can be driven with ArrayProcessing from a single amplifier rack, while a total of 48 Y-Series or V-Series line array modules can be driven in standard mode with linked loudspeakers. Adapters are available to break-out from the multicore cable to the individual NLT4 inputs of the loudspeakers. A break-in option is available to adapt an NL8 amplifier output to a MC24 multicore. All d&b Touring racks come fully assembled, prewired and tested.
1 powerCON® is a registered trademarks of Neutrik AG, Liechtenstein.