MITUS 210MA
Description
- 2-way bi-amplified, bass-reflex design with coaxial driver
- 2 x 250 mm (2 x 10’’) B&C custom neodymium magnet speakers with 64 mm (2.5’’) voice coil, one of them is coaxial with 36 mm (1.4’’) exit titanium compression driver and 64 mm (2.5’’) voice coil
- Frequency response from 60Hz to 20KHz
- Class D built-in amplifiers, 600WRMS to the LF and 300WRMS to the HF with switch mode power supply
- DSP with 8 eq presets
- Control panel with XLR input and link, volume, presets, HP-filter, ground-lift
- 70° conical dispersion
- 15 mm (5/8”) birch plywood enclosure, scratch resistant black paint finish
- 35 mm (1.38’’) stand socket and back side carrying handle
- Ideal for live sound stage monitoring applications, as well as a front of house main PA speaker
- Very lightweight, only 19Kg?
TECHNICAL SPECIFICATIONS
CODE:31761
CONFIGURATION:2 way
BUILT-IN AMPLIFIER LF/HF:600/300 W RMS
BUILT-IN AMPLIFIER PEAK LF/HF:1200/600 W
FREQUENCY RESPONSE:60Hz - 20KHz -6dB
LOW FREQUENCY WOOFER:2x10 - 2.5 coil neodymium inch
HIGH FREQUENCY DRIVER:1x1.4 - 2.5 coil neodymium-coax inch
MAXIMUM SPL CONT/PEAK:127/134 dB
DISPERSION:70°conical HxV
INPUT IMPEDANCE:22 Kohm
AC POWER REQUIREMENTS:640 VA
INPUT CONNECTOR:XLR with loop
POWER CORD:5/16.4 m/ft
NET DIMENSION (WXHXD):547x290x402 - 22.6x11.4x15.8 mm/inch
NET WEIGHT:19/41.9 kg/lb
TRANSPORT DIMENSION (WXHXD):890x390x510 - 35x15.4x20.1 mm/inch
TRANSPORT WEIGHT:21.1 / 46.5 kg/lb
