VENTIS 112MA
Description
The new coaxial monitors in bass reflex Ventis 112MA and Ventis 115MA expand the active and passive range of the series. Thanks to the B&C custom transducers they are capable of a 132dB SPL. The two enclosures are built with a 15mm birch plywood and they can also be used for fixed installation and FOH thanks to 35mm pole mount sockede and to the insert for optional mounting bracket.
2-way bi-amplified, bass-reflex design
320 mm (12”) coaxial custom woofer with 64 mm (2.5’’) voice coil, 25mm (1”) exit throat B&C with 44mm (1.7”) voice coil
Frequency response from 55Hz to 20kHz
DSP with 6 factory presets (ORIG, HI-CUT/DRUM-FILL, LO-CUT/DOUBLE, FOH, VOCAL, TOURING)
90° conical dispersion
35 mm (1.38’’) stand socket, two integrated handles, and optional wall mount bracket?
320 mm (12”) coaxial custom woofer with 64 mm (2.5’’) voice coil, 25mm (1”) exit throat B&C with 44mm (1.7”) voice coil
Frequency response from 55Hz to 20kHz
DSP with 6 factory presets (ORIG, HI-CUT/DRUM-FILL, LO-CUT/DOUBLE, FOH, VOCAL, TOURING)
90° conical dispersion
35 mm (1.38’’) stand socket, two integrated handles, and optional wall mount bracket?
TECHNICAL SPECIFICATIONS
CODE:41215
CONFIGURATION:2 way
BUILT-IN AMPLIFIER LF/HF:700/200 W RMS
BUILT-IN AMPLIFIER PEAK LF/HF:1400/400 W
FREQUENCY RESPONSE:55Hz - 20KHz -6dB
LOW FREQUENCY WOOFER:12 - 2.5 coil inch
HIGH FREQUENCY DRIVER:1 - 1.7 coil inch
MAXIMUM SPL CONT/PEAK:126/133 dB
DISPERSION:90° HxV
INPUT IMPEDANCE:22 Kohm
AC POWER REQUIREMENTS:640 VA
INPUT CONNECTOR:XLR with loop, RCA ST
POWER CORD:5/16.4 m/ft
NET DIMENSION (WXHXD):563x311x452 / 22.2x12.2x17.8 mm/inch
NET WEIGHT:17.5/38.6 kg/lb
TRANSPORT DIMENSION (WXHXD):663x411x552 / 26.1x16.2x21.7 mm/inch
TRANSPORT WEIGHT:22/48.5 kg/lb
