- Brands
- Caymon
-
HIGH END SYSTEMS
HIGH END SYSTEMS
- GLP
- Harrison
- BRYSTON
- ETC
- Solid State Logic
- d&b
-
PMC Speakers
PMC Speakers
- Prolyte Truss
- LITEC Truss
-
EXE Technology
EXE Technology
- FBT
- Joeco
-
Vega Pro
Vega Pro
- Prolyft
-
LightShark
LightShark
- Procab
- Audio Systems
Solid State Logic
- Studio Consoles
- SSL Mixers
- SSL Controllers
- SSL Live Consoles
- Portable USB Microphones
- SSL 500 Series Modules
- 19inch Analogue Processors
- SSL L100 Plus
- Analog Processors
- Audio Interfaces
- Dante I/O & Interfaces
- Duality Fuse
- Matrix2
- Nucleus2
- XL-Desk
- SSL L350 Plus
- SSL L200 Plus
- SSL Origin
- SSL AWS Delta
FBT
- FBT STAGE MONITORS
- FBT - LINE ARRAYS
- FBT SUBWOOFERS
- FBT COLUMN SPEAKERS
- FBT TWO-WAY ARRAYS
- FBT POINT SOURCES
- FBT WEATHERPROOF SPEAKERS
- FBT AMPLIFIERS
- EN54 VOICE ALARM - SECURITY AND EMERGENCY SYSTEMS
- EN54 VOICE ALARM CONSOLES
- EN54 VOICE ALARM SPEAKERS
- FBT ELECTRONICS
- FBT SOUND PROJECTOR
- FBT CEILING SPEAKERS
- FBT MICROPHONES
- FBT MUSICAL HORN
- FBT OUTDOOR SPEAKERS
- FBT PERMANENT INSTALLATION SPEAKERS
- FBT SURFACE MOUNT SPEAKERS
- Stage Lighting & Effects
- Trussing & Staging
Prolyte Truss
- Prolyte Standard Corners
- Prolyte Box Corners
- Prolyte Book Corners
- Prolyte Baseplates
- Prolyte Tubes
- Prolyte Accessories
- Prolyte Circular Truss
- Prolyte Ladder Truss
- Outdoor Advertising Structures
- Prolyte LSU System
- Prolyte Rectangular Truss
- Prolyte Rigging Accessories
- Prolyte Square Truss
- Prolyte Triangular Truss
- Prolyte Verto Truss
- Prolyte Folding Truss
- Prolyte Catwalk Truss
- Studio Equipment & Outboards
- Cables & Accessories
- Trussing & Staging
GSL8 loudspeaker
Description
GSL8 loudspeaker
Line arrays
Large format 3-way line array loudspeaker
- Components LF: 2 x 14" + 2 x 10"; MF: 1 x 10"; HF: 3 x 1.4" exit compression driver with 3.4" coil
- Dispersion 80°
- SPLmax 150 dB
- Weight 80 kg / 176 lb
Article number Z0750
Product Description
The GSL8 is a line array module specifically designed for large-scale sound reinforcement. Up to twenty-four GSL8 loudspeakers can be flown in vertical columns producing an 80° constant directivity dispersion pattern in the horizontal plane. The GSL8 houses two 14" neodymium forward-facing LF drivers and two side-firing 10" neodymium LF drivers. A coaxial mid-high section contains an MF horn with a 10" driver and three 1.4" exit, 3.4" voice coil HF compression drivers mounted to a dedicated wave-shaping device. SL-Series flying hardware comes with a patented workflow with integrated tension and compression rigging mode, allowing splay angles between cabinets from 0° to 7° in 1° increments. The loudspeakers are driven actively by two channels of an appropriate d&b amplifier, one channel powering the 14” LF drivers, the second channel powers all other components, these are passively crossed over. This component geometry allows for a smooth crossover design with well-defined overlaps between adjacent bands providing consistent, even, and very accurate horizontal dispersion. Due to the arrangement of the front and side-firing LF drivers, accurate directivity control is maintained from 45 Hz to above 18 kHz. The cabinets are constructed from marine plywood and have an impact and weather-protected PCP (Polyurea Cabinet Protection) finish. The front and side panels incorporate rigid metal grills backed by an acoustically transparent and water-repellent fabric. Each side panel incorporates a recessed handle, with additional handles are provided at the rear.
Amplifiers
The d&b D80 amplifier is required to drive the GSL8.
The 2-Way active GSL8 requires two channels of the D80.
The 2-Way active GSL8 requires two channels of the D80.