MITUS 212FSA
Description
- Compact vented band pass subwoofer sharing the same width and hardware suspension of the MITUS 206LA
- 320 mm (2 x 12’’) B&C neodymium magnet high excursion subwoofers with 75 mm (3’’) voice coils
- Frequency Response from 45Hz to 120Hz
- Class D amplifier delivering 1200WRMS
- Switch mode power supply DSP with 8 presets, cardioid and infra configurations, delay
- Control panel with XLR input and link, volume, presets, delay, phase 0°-180°, ground-lift
- 15 mm (5/8’’) birch plywood enclosure, scratch resistant black paint
- Low frequency extension cabinet for the MITUS 206LA line array for flying or ground stacked configurations.
- M20 top mount stand socket
TECHNICAL SPECIFICATIONS
CODE:31709
CONFIGURATION:1 way
BUILT-IN AMPLIFIER LF/HF:1200 W RMS
BUILT-IN AMPLIFIER PEAK LF/HF:2400 W
FREQUENCY RESPONSE:45Hz-120Hz -6dB
LOW FREQUENCY WOOFER:2x12 - 3 coil - neodymium inch
MAXIMUM SPL CONT/PEAK:134/138 half-space dB
DISPERSION:omnidirectional HxV
INPUT IMPEDANCE:22 Kohm
CROSSOVER FREQUENCY:preset dependant KHz
AC POWER REQUIREMENTS:640 VA
INPUT CONNECTOR:XLR with loop
POWER CORD:5/16.4 m/ft
NET DIMENSION (WXHXD):574x420x660 - 22.6x16.5x26 mm/inch
NET WEIGHT:36.5 - 80.5 kg/lb
TRANSPORT DIMENSION (WXHXD):780x710x520 - 30.7x28x20.5 mm/inch
TRANSPORT WEIGHT:41 / 90.4 Kg/lb
