- Brands
- Caymon
-
HIGH END SYSTEMS
HIGH END SYSTEMS
- GLP
- Harrison
- BRYSTON
- ETC
- Solid State Logic
- d&b
-
PMC Speakers
PMC Speakers
- Prolyte Truss
- LITEC Truss
-
EXE Technology
EXE Technology
- FBT
- Joeco
-
Vega Pro
Vega Pro
- Prolyft
-
LightShark
LightShark
- Procab
- Audio Systems
Solid State Logic
- Studio Consoles
- SSL Mixers
- SSL Controllers
- SSL Live Consoles
- Portable USB Microphones
- SSL 500 Series Modules
- 19inch Analogue Processors
- SSL L100 Plus
- Analog Processors
- Audio Interfaces
- Dante I/O & Interfaces
- Duality Fuse
- Matrix2
- Nucleus2
- XL-Desk
- SSL L350 Plus
- SSL L200 Plus
- SSL Origin
- SSL AWS Delta
FBT
- FBT STAGE MONITORS
- FBT - LINE ARRAYS
- FBT SUBWOOFERS
- FBT COLUMN SPEAKERS
- FBT TWO-WAY ARRAYS
- FBT POINT SOURCES
- FBT WEATHERPROOF SPEAKERS
- FBT AMPLIFIERS
- EN54 VOICE ALARM - SECURITY AND EMERGENCY SYSTEMS
- EN54 VOICE ALARM CONSOLES
- EN54 VOICE ALARM SPEAKERS
- FBT ELECTRONICS
- FBT SOUND PROJECTOR
- FBT CEILING SPEAKERS
- FBT MICROPHONES
- FBT MUSICAL HORN
- FBT OUTDOOR SPEAKERS
- FBT PERMANENT INSTALLATION SPEAKERS
- FBT SURFACE MOUNT SPEAKERS
- Stage Lighting & Effects
- Trussing & Staging
Prolyte Truss
- Prolyte Standard Corners
- Prolyte Box Corners
- Prolyte Book Corners
- Prolyte Baseplates
- Prolyte Tubes
- Prolyte Accessories
- Prolyte Circular Truss
- Prolyte Ladder Truss
- Outdoor Advertising Structures
- Prolyte LSU System
- Prolyte Rectangular Truss
- Prolyte Rigging Accessories
- Prolyte Square Truss
- Prolyte Triangular Truss
- Prolyte Verto Truss
- Prolyte Folding Truss
- Prolyte Catwalk Truss
- Studio Equipment & Outboards
- Cables & Accessories
- Trussing & Staging
VERTUS CLA 206A
Description
ACTIVE COLUMN ARRAY 600W + 300W - 133DB SPL
Stand-alone or as a part of the CLA 604.2A system, the CLA 206A 2 x 6.5" + 1 x 1.4" active cabinet excels for both SPL and audio articulation.
- Bi-amplified 2-way line array
- 2 x 165mm (6.5") custom woofers with 38mm (1.5") coil
- Neodymium B&C compression HF driver with 36mm (1.4") throat and 64mm (2.5") coil
- Large format FBT waveguide with 100 degrees H x 25 degrees V dispersion
- Frequency response from 65Hz to 20KHz
- Class-D 600Wrms for LF and 300Wrms for HF amplifiers with switching mode power supply
- DSP processor with 8 equalizations presets
- Control panel with XLR input and link, volume, presets, filter-HP, ground-lift
- Neutrik PowerCON IN and LINK power connectors
- Cabinet in 12mm (0.5") birch plywood with scratch-resistant varnish, two side handles, rubber inserts for protection, and anti-slip upper and lower
- 4 lateral inserts, two upper and two lower points designed to accept quick-release pins or M10 screws. New hardware for flying installations, ground setups, and the possibility of coupling two or more CLA 406A /CLA 206A with an angle of 0 degrees - 20 degrees in 5 degrees steps vertically, all with optional quick-release pins for touring.
- 35mm stand socket
- The top side is inclined 20 degrees to have maximum flexibility of use in combination with other CLA 206A or CLA 406A in order to adapt the vertical dispersion angle of the system to the listening area.
- The system can be used both in small point source systems with the CLA 118SA sub and in clusters of two to have a dispersion of 40 degrees (V). It can also be considered a down-fill for CLA 406A systems.